Platypus Controller

Platypus Controller Bare 12volt 3G/4G (no temp sensor or antenna) w/ fuse & powerpack

$4,271.00

Continue Shopping 0

Product Details

Ability to start and stop: Diesel, Gas, Propane & Electric Water Pumps

The Platypus Controller measures ambient air temperature to automatically activate compatible equipment that supplies water to the sprinkler system. The temperature that activates the system is set by the user up to a maximum of 140°F. When the ambient air temperature rises above the set point, the system becomes active. The system will run for an amount of time which is set by the user up to a maximum of 60 minutes. After the run time has expired, the system pauses for an amount of time, also set by the user, up to a maximum of 60 minutes. The ambient air temperature is measured again, if it is still above the set point the controller will run the system again. This cycle is repeated until the ambient air temperature falls 35°F to 40°F below the set point. During these cycles the controller will send SMS information* to the stored numbers advising the status of the system. The EVAC Button feature allows the user to turn the system on to run for cycle times up to 60 minutes when leaving the property, after the set time has expired the controller will go back into Auto Mode

Additional information