How The System Runs

How Our Simplified and Affordable Solution for Wildfire Protection for your Home and Property Works

How the Wildfire Protection Platypus® Sprinkler Works

Is your home or business located in a wildfire prone area? For peace of mind you should install the latest in wildfire protection to protect your most important assets. Our sprinkler system is designed for maximum protection from wildfire attack on residential, commercial or public assets in the event of a wildfire.

The Platypus Sprinkler can be installed during construction of new homes and buildings so that the pipework can be concealed or in the case of existing dwellings and buildings, easily retrofitted with exposed pipework.

The Platypus Wildfire Sprinkler System offers an affordable and simple to install water based fire protection system designed and made in Australia. The Platypus Wildfire Sprinkler System was inspired by the need for an affordable and simple to install sprinkler system that provides protection to homes, commercial and public assets from Wildfire attack in the event of a wildfire. Sprinkler heads are typically mounted along the fascia line and or ridgeline of the building. Fascia line sprinklers are mounted to ensure water is sprayed onto the roof to keep gutters wet and create a curtain effect around the building. This means any Wildfire are dampened and radiant heat reduced by water sprayed from sprinklers. The effect is similar to a fireman approaching a fire.The system can be installed by approved installer, but also available for DIY.

Autonomous Controller with Remote Capabilities

The Platypus Controller can be autonomous and remote controlled via SMS message. The Playpus Contoller measures ambient air temperature to automatically activate compatible equipment that supplies water to the sprinkler system. The temperature that activates the system is set by the user up to a maximum of 140°F. When the ambient air temperature rises above the set point, the system becomes active. The system will run for an amount of time which is set by the user up to a maximum of 60 minutes. After the run time has expired, the system pauses for an amount of time, also set by the user, up to a maximum of 60 minutes. The ambient air temperature is measured again, if it is still above the set point the controller will run the system again. This cycle is repeated until the ambient ambient air temperature falls 4°F to 10°F below the set point. During these cycles the controller will send SMS information* to the stored numbers advising the status of the system. The EVAC Button feature allows the user to turn the system on to run for cycle times up to 60 minutes when leaving the property, after the set time has expired the controller will go back into Auto Mode.
The Platypus Controller can also be activated and reviewed via SMS text. There will be a SIM card installed by the installer and have a direct phone number. There can be up to 5 users that have access to the controller. With the access each user will have a list of key words in which you can text the controller and get a response to check status of the battery, temperature setting, current temperature, . The controller can also be turned on and turned off by texting the controller.

One of a Kind Sprinkler Design with Wildfire in Mind.

The unique design features of the Platypus Sprinkler make it more effective in high wind conditions than standard butterfly sprinklers. Its high winds that cause Wildfire attack. We have eliminated the need for an outer support frame typically found on standard butterfly sprinklers. This frame is responsible for breaking down the stream of water through the sprinkler head into very small droplets. The smaller the water droplets the more likely they are to be effected by wind. Another unique design feature of the Platypus Sprinkler is that it sprays larger water droplets. They are sprayed “out and down” somewhat like rain rather than up in the air. With the water not being lost to the wind up to 60 percent of water used is recycled by systems with downpipes connected to a water supply tank. Incorporating out Flow Control Inserts into your system will ensure optimum operation of each sprinkler.

The Platypus Sprinkler has a twin outlet head that spins on a central shaft.
The design of the head ensures water droplets spray out and down from the sprinkler head, and water is sprayed in a full circle spray pattern.

A unique feature of the Platypus Sprinkler is it doesn’t have an outer support frame around the spinner, this ensures the water stream is not broken and therefore the concentration of large droplets dispersed is higher and less wind effected—this means more of your water stays on the building. Other sprinklers that have an outer support frame produce smaller droplets and mist—making them less effective.

DIY Installation Option

For those who prefer a hands-on approach to safeguarding their homes and businesses, the Platypus Wildfire Sprinkler System also offers a DIY installation option. Our system is designed with simplicity in mind, allowing homeowners to install it themselves with ease. By choosing the DIY route, you gain the flexibility to install the system at your convenience while still ensuring the highest level of protection against wildfires. For detailed installation guides, tips, and all the support you need to install your Platypus Sprinkler System, please visit our Manuals page.

The Platypus Sprinkler has a twin outlet head that spins on a central shaft.
The design of the head ensures water droplets spray out and down from the sprinkler head, and water is sprayed in a full circle spray pattern.

A unique feature of the Platypus Sprinkler is it doesn’t have an outer support frame around the spinner, this ensures the water stream is not broken and therefore the concentration of large droplets dispersed is higher and less wind effected—this means more of your water stays on the building. Other sprinklers that have an outer support frame produce smaller droplets and mist—making them less effective.

Platypus® Wildfire Sprinkler – The Only Wildfire Designed Sprinkler

Our Platypus Wildfire Sprinkler is not just another irrigation device repurposed for fire safety. It is the only sprinkler design in the market crafted specifically for wildfire defense. With a patented technology that outperforms conventional knock sprinklers, our system ensures that your property is shielded by a product engineered exclusively for the challenges of wildfire protection.

  • Effective Wildfire Protection
  • Flow & Pressure Tested
  • Engineered to Highest Quality
  • 12 month warranty
  • Efficient Water Use
  • Aust Patent 2012254967
  • US Patent 9,403,175

 

Download Now

Our Wildfire Protection sprinkler system is designed for maximum protection from wildfire attack on residential, commercial or public assets in the event of a fire.